Schnellerco. Board Care

How to Care /How Often:

Wooden cutting boards need to be thoroughly washed with warm soap and rinsed with hot water after use. Never stick your cutting board into the dishwasher, also do not allow your cutting board to soak in water; this will cause damage to the boards. After you are done scrubbing down, you board dry off-board in the open You should clean and maintain your cutting board depending on how often you use it. Long term maintenance should happen when the board looks dry or every 2-3 months.

Everyday Use:

Clean your board after every use with hot water and soap. Once washed, dry it with a towel and let the cutting board air dry on the cloth.

Long Term Care:

Before you start caring for your board, it is recommended that you deep clean your board by scrubbing them with lemon and salt.

What you need :

• Schneller.co cutting board

• A clean rag

• Mineral oil (Recommend)  

Oiling Board Process:

1. Apply mineral oil, or any FDA approved oil with a clean rag or paper towel, create a thin layer on the surface

2. let the oil dry for 5-8 hours for the best results so it can reach inside the cracks and dries.

3.  After 5-8 hours, check if the board is dry; if it feels a little sticky, grab a new cloth and wipe down the surface to remove any excess oil.

4. Now your board is ready to use!